- REALE
- China
- 15 days after deposit
- 25 sets one month
The temperature range of Huanrui Temperature And Humidity Test Chamber, can be adjusted from -20 degrees to 150 degrees,and the volume is from 23L to 1000L.
Each parameter of Temperature And Humidity Test Chamber provides customized services and a team of professional engineers provides solutions to suit the needs of different customers.
Laboratory Temperature And Humidity Test Chamber
The temperature and humidity values set by the user can be maintained in the temperature and humidity test chamber, and these temperature and humidity values can also be alternately changed by program settings. If you need to test the performance of the product under high temperature, low temperature, high humidity, dryness, alternating temperature and humidity, then Huanrui temperature and humidity test chamber is your best choice.
Equipment withColour 7-inch LCD Touch Screen,english interface display, easy to understand and operate
Technical Parameters
Model | RHP-23 | RHP-80 | RHP-100 | RHP-150 | RHP-225 | RHP-408 |
System | Balanced temperature & humidity control system | |||||
Temp. range | -70°C~150C° | |||||
Humidity range | 20%~98%R.H | |||||
Temp. fluctuation | ±0.5℃ | |||||
Humidity fluctuation | ±2.5%R.H | |||||
Temperature deviation | ±2.0℃ | |||||
Humidity deviation | ±3%RH(≥75%)/±5%RH(<75%) | |||||
Heat up time | -20°C~150°C 45 minutes, -40°C~150°C 60 minutes, -70°C~150°C 75minutes | |||||
Pull down time | 20°C~-20°C 40minutes, 20°C~-40°C 60minutes, 20°C~-70°C 85minutes | |||||
Internal dimension (CM) | W30 | W40 | W50 | W50 | W60 | W68 |
H30 | H50 | H50 | H60 | H75 | H80 | |
D25 | D40 | D40 | D50 | D50 | D75 | |
Interior material | Stainless steel 304 | |||||
Exterior material | Backed paiting steel or stainless steel(SUS304) | |||||
Insulation material | Rigid polyruethane foam +glass fibre | |||||
Cooling system | 1. Air cooled (Water cooled type is option) 2. Singl section/cascade type, hermetic/semitight compressor,CFC free refrigerant | |||||
Controller | Color LCD screen in English/Chinese, programing,communicating function | |||||
Safety devices | No welding wire switch, compressor overheating and over current protection, over temperature protection, blower overload protection, dry heating machine protector,low water protection, fault warning system. | |||||
Standard accessories | one observation window, one test hole, two sets of test rack, one floodlight, one indicator light, four moving wheels, one humidifying tank, 2meters of power cord, communication interface | |||||
Power | AC380V±10% 50HZ 3 phase 4 wires+ground wires | |||||
REALE temperature and humidity test chamber meet the standards:
IEC60068-2-1 : Cold
IEC60068-2-2 : Dry heat
IEC60068-2-38 : Composite temperature/ humidity cyclic test
IEC60068-2-78 : Damp heat, steady state
IEC60068-2-14 : Change of temperature with specified rate of change
IEC61747(5.2.7) : Liquid crystal and solid-state display devices Environmental, endurance
and mechanical test (Rapid-Rate Temperature Cycle Type)
IEC60068-30 : Damper heat, cyclic (Rapid-Rate Temperature Cycle Type)
ISO16750-4 5.3 : Road vehicles (temperature cycling)
